| Customization: | Available |
|---|---|
| Installation: | Inflatable Climbing Wall |
| Wall Type: | Vertical |
Suppliers with verified business licenses
| Parameter Item | Typical Value / Description |
|---|---|
| Main Material | High-strength PVC laminated mesh fabric (typically 0.45mm - 0.9mm thickness, selected based on load capacity and size), non-toxic, odorless, compliant with National/EU/US standards |
| Specifications & Size | Customizable, common sizes: • Small (3m×3m×3m) suitable for ages 3-6 • Medium (5m×5m×4m) suitable for ages 6-12 • Large (8m×6m×6m) suitable for teenagers and adult challenges |
| Inflation Method | Continuous low-pressure inflation, equipped with a dedicated blower (Power typically 1100W - 2200W, 220V/50Hz) |
| Inflation Time | 3 - 8 minutes (depends on volume and blower power) |
| Storage Volume | Foldable after deflation, storage volume approx. 1/30 - 1/50 of inflated state, easy for transport and storage |
| Applicable Age | Generally 3 years and above (different heights and difficulties correspond to different age groups) |
| Load Capacity | Each climbing point/step approx. 100 - 150 kg; overall capacity depends on contact area and air pressure |
| Safety Protection | • Raised inflatable barriers (height ≥ 50cm) to prevent falls • Safety netting (for large equipment) • Windproof anchoring system (ground stakes/sandbags fixation, wind resistance level ≥ 6) |
| Wear Resistance / Weather Resistance | Surface treated for wear resistance, high tear strength; operating temperature range -20ºC ~ +50ºC, UV resistant (UV coating recommended for outdoor use) |
| Colors & Shapes | Vibrant colors, customizable themes like rockets, A-frames, L-shapes, cartoon animals, etc. |
| Integrated Play Features | Can combine elements like climbing, slides, trampolines, crawling tunnels, obstacle courses for enriched play experience |
| Blower Power Consumption | Approx. 1 - 2 kWh for continuous operation (low operating cost) |
| Safety Standards | Compliant with GB 6675 (China Toy Safety Standard), EN 14960 (EU Inflatable Play Equipment Standard), ASTM F2374 (US Inflatable Play Device Standard), etc. |
| Maintenance & Cleaning | Surface is waterproof and stain-resistant, can be wiped clean with water or mild detergent, easy to maintain |
Quality control:
1. A strict quality management system.
2. Independent printing, producing and packing department.
3. Each department with a professional QC.
4. All products must be inflated for 24 hours before deflating and packing
){kind=link}